2005 Nov
This allows existing Ethernet devices (switch, router, workstation, etc) acting as Customer Edge devices to be compliant to this IA with no additional software or hardware upgrades
This document specifies an implementation agreement for MEF User to Network Interface (UNI) Type 1. The main objective of this version is to specify the MEF UNI characteristics and operation in manual configuration mode. This allows existing Ethernet devices (switch, router, workstation, etc) acting as CEs to be instantly compliant to this IA with no additional software or hardware upgrades. The main functionality of this version is to allow data-plane Ethernet connectivity between the UNI-C and UNI-N. This document references MEF UNI Requirements and Framework for all concepts, constructs and terminology. The UNI Type 1 mode provides bare minimum data-plane connectivity services with no control-plane or managementplane capabilities.
Standards published by Mplify are intended for general distribution to the public and may be downloaded from this site and reproduced without charge. Any reproduction of Mplify documents shall contain the following statement: “Reproduced with permission of Mplify Alliance.” All rights granted to Mplify under applicable copyright laws are expressly reserved. No permission is granted to any recipient or user of Mplify publications to modify any of the information contained therein and Mplify disclaims all responsibility and liability for such modifications.